Use the same procedure for RHD and LHD vehicles.
The following procedure is for LHD vehicles.
55900
1.REMOVE AIR CONDITIONING CONTROL ASSEMBLY (for TMT Made Automatic Air Conditioning System)
55900A
2.REMOVE HEATER CONTROL AND ACCESSORY ASSEMBLY (for TMT Made Manual Air Conditioning System)
81080J
3.REMOVE NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY
| *a | Protective Tape |
Disconnect the connector.
Using a screwdriver with its tip wrapped with protective tape, disengage the 2 claws to remove the No. 1 interior illumination light assembly.