81260A
1.REMOVE MAP LIGHT ASSEMBLY
Using a moulding remover, disengage the 4 clips.
| *1 | Microphone Connector |
w/ Microphone
Disconnect the 2 connectors to remove the map light assembly.
w/o Microphone
Disconnect the connector to remove the map light assembly.
86730C
2.REMOVE TELEPHONE MICROPHONE ASSEMBLY (w/ Microphone)
81260C
3.REMOVE MAP LIGHT BULB
Turn the 2 map light sockets with the 2 map light bulbs in the direction indicated by the arrows in the illustration to remove them.
Remove the 2 map light bulbs from the 2 map light sockets.