81260A
1.INSPECT MAP LIGHT ASSEMBLY
| *a | Component without harness connected
(Map Light Assembly) |
Check the operation.
Apply battery voltage to the connector and check that the personal lights come on.
| Connection | Condition | Specified Condition |
|---|---|---|
| Battery positive (+) → 1 (+B1)
Battery negative (-) → 4 (GND9) |
Personal light switches off | Personal light LH and RH do not come on |
| Personal light switch LH on | Personal light LH comes on | |
| Personal light switch RH on | Personal light RH comes on | |
| Personal light switches off and interior light door switch ON | Personal light LH and RH comes on | |
| Battery positive (+) → 1 (+B1)
Battery negative (-) → 3 (DOOR) |
Personal light switches off and interior light door switch off | Personal light LH and RH do not come on |
| Personal light switches off and interior light door switch DOOR | Personal light LH and RH comes on |
If the result is not as specified, replace the map light assembly.