Home › Vehicle Interior › LIGHTING (INT) › FRONT DOOR COURTESY SWITCH › from 2017.10
RM30M0E _58 Vehicle Interior _017112 LIGHTING (INT) _0092851 FRONT DOOR COURTESY SWITCH A

LIGHTING (INT)  FRONT DOOR COURTESY SWITCH  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for both the LH and RH sides.

·

The procedure described below is for the LH side.



PROCEDURE

Hide 84233 1.INSTALL FRONT DOOR COURTESY LIGHT SWITCH ASSEMBLY

a.

Connect the connector.


b.

Using a T30 "TORX" socket wrench, install the front door courtesy light switch assembly with the screw.

NOTICE:

When reusing the front door coutesy light switch assembly, replace the screws with 90166-70001 screws to avoid insecure installation.


Torque:
6.3 N*m (64 kgf*cm, 56 in.*lbf)