64610
1.INSPECT LUGGAGE COMPARTMENT DOOR LOCK ASSEMBLY
| *a | Component without harness connected (Luggage Compartment Door Lock Assembly) |
| *b | Unlock |
| *c | Lock |
Check the resistance.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Switch Condition | Specified Condition |
|---|---|---|
| 2 (ACT-) - 3 (D+) | Unlocked | Below 1 Ω |
| 2 (ACT-) - 3 (D+) | Locked | 10 kΩ or higher |
If the result is not as specified, replace the luggage compartment door lock assembly.