Home › Vehicle Interior › LIGHTING (INT) › BACK DOOR COURTESY SWITCH(for TMT Made Sedan) › 2017.10–2018.01
RM30M0E _58 Vehicle Interior _017112 LIGHTING (INT) _0334212 BACK DOOR COURTESY SWITCH(for TMT Made Sedan) A

LIGHTING (INT)  BACK DOOR COURTESY SWITCH(for TMT Made Sedan)  INSTALLATION  


PROCEDURE

Hide 64610 1.INSTALL LUGGAGE COMPARTMENT DOOR LOCK ASSEMBLY (w/o Smart Entry and Start System)

a.

Apply MP grease to the sliding parts of the luggage compartment door lock assembly.


b.

Install the luggage compartment door lock assembly with the 2 bolts.

Torque:
5.5 N*m (56 kgf*cm, 49 in.*lbf)


c.

Connect the connector.


d.
B484004C02
1.698,1.021 1.552,0.635 true 1.188,2.292 0.74,1.854 true 2.969,1.458 2.771,1.594 true 1.75,0.969 2.063,1.167 0.313,0.198 10 false *b 1.24,2.229 1.552,2.427 0.313,0.198 10 false *a 2.583,1.5 2.896,1.698 0.313,0.198 10 false *b
*a Guide
*b Clamp


Engage the 2 clamps.


e.

Engage the guide to connect the luggage door lock cable.


Hide 64610 2.INSTALL LUGGAGE COMPARTMENT DOOR LOCK ASSEMBLY (w/ Smart Entry and Start System)

a.

Apply MP grease to the sliding parts of the luggage compartment door lock assembly.


b.
B343716

Install the luggage compartment door lock assembly with the 2 bolts.

Torque:
5.5 N*m (56 kgf*cm, 49 in.*lbf)


c.

Engage the guide to connect the luggage door lock control cable sub-assembly.


d.
B343717

Engage the 2 claws to close the protector lid in the direction indicated by the arrow as shown in the illustration.


e.

Connect the connector.


Hide 64719A 3.INSTALL LUGGAGE COMPARTMENT DOOR COVER