Home › Vehicle Interior › LIGHTING (INT) › LIGHTING SYSTEM › 2017.10–2018.01
RM30M0E _58 Vehicle Interior _017112 LIGHTING (INT) _0090848 LIGHTING SYSTEM D

LIGHTING (INT)  LIGHTING SYSTEM  SYSTEM DESCRIPTION  


ILLUMINATED ENTRY SYSTEM (w/ Power Door Lock)


a.

The illuminated entry system has the following control functions:

i.

Map Light Assembly and Room Light Assembly*1

*1: for TMT Made


HINT:

When switch is in DOOR position.


Control Outline
Door Lock/Unlock-linked When the ignition switch is off and the driver door is unlocked, the lights that operate turn on.
When the driver door is locked, the lights that operate turn off.
Door Open/Close-linked When any door is opened, the lights that operate turn on.
When the ignition switch is turned to ON and all doors are closed, the lights that operate turn off.
Ignition Switch-linked When the ignition switch is turned from ON to off, the lights that operate turn on.
When the ignition switch is turned from off to ON, the lights that operate turn off.
Delay When approximately 15 seconds elapse after any of the following conditions are met, the lights that operate turn off:
·

The door unlock-linked function is active.

·

Any door is opened and then all doors are closed when the ignition switch is off.

·

The ignition switch is turned from ON to off when all doors are closed.




ii.

Engine Switch (w/ Smart Entry and Start System)

Control Outline
Door Lock/Unlock-linked When the engine switch is off and the driver door is unlocked, the lights that operate turn on.
When any of the following conditions are met, the lights that operate turn off:
·

The engine switch is off and all doors are closed, and then the driver door is locked.

·

With all doors closed, the headlight dimmer switch is moved from the tail position to off, and then all doors are locked.


Door Open/Close-linked When any door is opened, the lights that operate turn on.
When any of the following conditions are met, the lights that operate turn off:
·

All doors are closed when the engine is running.

·

With all doors locked, the headlight dimmer switch is moved from the tail position to off, and then all doors are closed.


Engine Switch-linked When the engine switch is turned from off to on (ACC or IG), the lights that operate turn on.
When the engine switch is on (ACC or IG) and then the engine is started, the lights that operate turn off.
When the engine switch is turned from on (ACC) to off, the lights that operate turn off.
Dimmer Switch-linked When the headlight dimmer switch is in the tail position, the lights that operate turn on.
When all doors are closed and locked and the headlight dimmer switch is moved from the tail position to off, the lights that operate turn off.
Delay When approximately 15 seconds elapse after any of the following conditions is met, the lights that operate turn off:
·

The door unlock-linked function is active.

·

Any door is opened and then all doors are closed when the engine switch is off.

·

The engine switch is turned from on (IG) to off when all doors are closed.

·

With all doors closed and any of the doors unlocked, the headlight dimmer switch is moved from the tail position to off.*1



*1: However, when all doors are locked within 15 seconds, the lights that operate turn off.





BATTERY SAVING FUNCTION (w/ Power Door Lock)


a.

The battery saving function has the following control functions:

Control Outline Lights that Operate
Battery Saving When the doors remain in the same condition for 20 minutes and the key is outside the vehicle exterior detection area, the illumination of the items listed to the right turns off.*1
·

Engine Switch*1

·

Map Light Assembly (When switch is in DOOR position)

·

Room Light Assembly (When switch is in DOOR position)*3


When the doors remain in the same condition for 20 minutes and the key is outside the ignition key cylinder, the illumination of the items listed to the right turns off.*2

*1: w/ Smart Entry and Start system

*2: w/o Smart Entry and Start system

*3: for TMT Made