Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › FRONT PASSENGER AIRBAG ASSEMBLY(for TMMIN Made) › 2017.10–2018.01
RM30M0E _58 Vehicle Interior _017115 SUPPLEMENTAL RESTRAINT SYSTEMS _0334262 FRONT PASSENGER AIRBAG ASSEMBLY(for TMMIN Made) G

SUPPLEMENTAL RESTRAINT SYSTEMS  FRONT PASSENGER AIRBAG ASSEMBLY(for TMMIN Made)  ON-VEHICLE INSPECTION  


CAUTION / NOTICE / HINT

CAUTION:

Be sure to correctly follow the removal and installation procedures for the instrument panel passenger airbag assembly.


PROCEDURE

Hide 73970A 1.INSPECT INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY (for Vehicle not Involved in Collision)


b.

Visually check for defects with the instrument panel passenger airbag assembly installed on the vehicle.

HINT:

The defects are as follows:

·

Cuts on the instrument panel safety pad assembly around the instrument panel passenger airbag assembly

·

Small cracks on the instrument panel safety pad assembly around the instrument panel passenger airbag assembly

·

Significant discoloration on the instrument panel safety pad assembly around the instrument panel passenger airbag assembly



OK:

No defects are found.


If any of the defects is found, replace the instrument panel safety pad assembly with a new one.


Hide 73970A 2.INSPECT INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY (for Vehicle Involved in Collision and Airbag not Deployed)


b.

Visually check for defects with the instrument panel passenger airbag assembly removed from the vehicle.

HINT:
·

Cuts on the surface or in the grooves

·

Small cracks on the surface or in the grooves

·

Significant discoloration on the surface or in the grooves

·

Cracks or other damage to the connector

·

Deformation or cracks on the instrument panel safety pad assembly or instrument panel reinforcement



OK:

No defects are found.


If any of the defects is found, replace the instrument panel passenger airbag assembly, instrument panel sub-assembly or instrument panel reinforcement with a new one.