Be sure to follow the correct removal and installation procedures of the front seat side airbag assemblies.
1.INSPECT FRONT SEAT SIDE AIRBAG ASSEMBLY (for Vehicle not Involved in Collision)
Perform a diagnostic system check.
Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>DTC CHECK / CLEAR
Visually check for defects with the front seat side airbag assemblies installed on the vehicle.
The defects are as follows:
Cuts on the front seatback assembly around the front seat side airbag assemblies
Small cracks on the front seatback assembly around the front seat side airbag assemblies
Significant discoloration on the front seatback assembly around the front seat side airbag assemblies
No defects are found.
If any of the defects is found, replace the front seat side airbag assembly with a new one.
2.INSPECT FRONT SEAT SIDE AIRBAG ASSEMBLY (for Vehicle Involved in Collision and Airbag has not Deployed)
Perform a diagnostic system check.
Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>DTC CHECK / CLEAR
Visually check for defects with the front seat side airbag assemblies removed from the vehicle.
The defects are as follows:
Cuts on the surface of the front seat side airbag assemblies
Small cracks on the surface of the front seat side airbag assemblies
Marks from being dropped
Deformation on the installation part of the front seat side airbag assemblies
Cracks or other damage to the wire harness or connector
No defects are found.
If any of the defects is found, replace the front seat side airbag assembly with a new one.