Home › Vehicle Exterior › HORN › HORN(for TMMIN Made) › 2017.10–2018.01
RM30M0E _59 Vehicle Exterior _017127 HORN _0334648 HORN(for TMMIN Made) G

HORN  HORN(for TMMIN Made)  INSPECTION  


PROCEDURE

Hide 86520 1.INSPECT LOW PITCHED HORN ASSEMBLY

a.
B341238C01
0.604,1.99 0.688,1.885 false 2.823,1.542 2.885,1.135 false 2.167,1.333 2.313,1.708 false 0.479,1.969 0.792,2.125 0.313,0.156 10 false *b 0.073,0.031 0.385,0.229 0.313,0.198 10 false *a 2.75,1.573 3.063,1.771 0.313,0.198 10 false *c 2.333,1.719 2.646,1.917 0.313,0.198 10 false 1
*a Component without harness connected
(Low Pitched Horn Assembly)
*b Battery
*c Body Ground


Check the operation.

i.

Apply battery voltage to the terminal and the body ground, and check that the horn sounds.

OK:
Measurement Condition Specified Condition
Battery positive (+) - Terminal 1 Horn sounds
Battery negative (-) - body ground


If the result is not as specified, replace the low pitched horn assembly.