Home › Vehicle Exterior › WIPER / WASHER › REAR WIPER MOTOR › from 2017.10
RM30M0E _59 Vehicle Exterior _017125 WIPER / WASHER _0116750 REAR WIPER MOTOR G

WIPER / WASHER  REAR WIPER MOTOR  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 85110R 1.INSPECT REAR WIPER MOTOR ASSEMBLY

a.
E373680C01
2.24,2.604 1.979,2.406 false 1.781,2.281 2.094,2.479 0.313,0.198 10 false *a 2.854,2.365 3.167,2.563 0.313,0.198 10 false a 2.865,2.667 3.177,2.865 0.313,0.198 10 false a
*a Alignment Mark


Operate the rear wiper motor assembly.


b.

Stop the rear wiper motor assembly operation.


c.

Check the automatic stop position.

HINT:

After the rear wiper motor is stopped, check the automatic stop position after lifting the wiper blade 2 times.


Reference Measurement:
Area Area
a 10.0 mm (0.394 in.)


OK:

The rear wiper stops at the position shown in the illustration.