Home › Vehicle Exterior › DOOR / HATCH › HOOD(for TMT Made) › 2017.10–2018.01
RM30M0E _59 Vehicle Exterior _017122 DOOR / HATCH _0335793 HOOD(for TMT Made) A

DOOR / HATCH  HOOD(for TMT Made)  DISASSEMBLY  


PROCEDURE

Hide 53341B 1.REMOVE HOOD INSULATOR (w/ Hood Insulator)

a.
B470625

Using a clip remover, remove the 6 clips and the hood insulator.


Hide 85035 2.REMOVE WASHER NOZZLE SUB-ASSEMBLY

Hide 85373 3.SEPARATE WINDSHIELD WASHER HOSE

a.
B470626C01
1.75,0.625 2.292,0.458 2.292,0.458 2.25,0.677 true 0.521,1.646 1.292,1.354 1.292,1.354 1.052,0.948 true 0.417,1.25 1.281,1.354 true 0.542,1.104 1.281,1.354 true 2.313,0.302 2.625,0.458 0.313,0.156 10 false *a 1.375,1.26 1.688,1.417 0.313,0.156 10 false *b
*a Guide
*b Clamp


Disengage the 2 guides and 4 clamps to separate the windshield washer hose.


Hide 85387A 4.REMOVE NO. 2 WASHER CLAMP

a.
B345219

Using a clip remover, disengage the 2 clamps and remove the 2 No. 2 washer clamps.


Hide 85387B 5.REMOVE NO. 3 WASHER CLAMP

a.
B344838

Using a clip remover, disengage the 2 clamps and remove the 2 No. 3 washer clamps.