OVERALL CAN BUS DIAGRAM (for TMMIN Made)
The CAN communication system is composed of 1 bus.
| 1 | Combination Meter Assembly | 2 | Certification ECU (Smart Key ECU Assembly) (w/ Smart Entry and Start System) |
| 3 | Airbag ECU Assembly | 4 | Brake Actuator Assembly |
| 5 | Air Conditioning Amplifier Assembly | 6 | Spiral Cable with Sensor Sub-assembly |
| 7 | DLC3 | 8 | ECM |
Refer to the following bus wiring diagrams for details.
OVERALL CAN BUS DIAGRAM (for TMT Made)
The CAN communication system is composed of 1 bus.
| 1 | Combination Meter Assembly | 2 | Certification ECU (Smart Key ECU Assembly) (w/ Smart Entry and Start System) |
| 3 | Airbag ECU Assembly | 4 | Brake Actuator Assembly |
| 5 | Air Conditioning Amplifier Assembly | 6 | Steering Sensor (w/ VSC) |
| 7 | DLC3 | 8 | Power Steering ECU Assembly |
| 9 | ECM | - | - |
Refer to the following bus wiring diagrams for details.
V BUS (for TMMIN Made)
The CAN communication system connects to other networks via ECUs that function as a gateway.
Click herePower Source / Network>NETWORKING>LIN COMMUNICATION SYSTEM>SYSTEM DIAGRAM
V BUS (for TMT Made)
The CAN communication system connects to other networks via ECUs that function as a gateway.
Click herePower Source / Network>NETWORKING>LIN COMMUNICATION SYSTEM>SYSTEM DIAGRAM