Home › Vehicle Interior › DOOR LOCK › DOOR CONTROL BATTERY › from 2017.10
RM30M0E _58 Vehicle Interior _017110 DOOR LOCK _0335973 DOOR CONTROL BATTERY G

DOOR LOCK  DOOR CONTROL BATTERY  INSPECTION  


PROCEDURE

Hide 8598A 1.INSPECT DOOR CONTROL BATTERY

a.
E314031C11
1.552,1.833 1.823,1.365 true 1.073,1.854 1.375,1.365 true 2.448,1.823 2.063,1.344 true 1.344,0.802 1.031,0.333 true 1.844,0.802 2.25,0.323 true 0.083,0.083 0.396,0.281 0.313,0.198 10 false *a 0.823,0.146 1.438,0.344 0.615,0.198 10 false BATB 2.417,1.885 2.729,2.083 0.313,0.198 10 false IG 0.823,1.885 1.438,2.083 0.615,0.198 10 false DRLY 1.385,1.875 2,2.073 0.615,0.198 10 false ACTG 2.115,0.115 2.729,0.313 0.615,0.198 10 false EDOR
*a Component without harness connected
(Door Control Battery)


Inspect the door control battery.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
5(BATB) - 11(DRLY) Voltage is not applied between terminals 8 (IG) and 9 (ACTG) 10 kΩ or higher
Voltage is applied between terminals 8 (IG) and 9 (ACTG) Below 1 Ω


If the result is not as specified, replace the door control battery.


ii.

Measure the voltage according to the value(s) in the table below.

Tester Connection Condition Specified Condition
11(DRLY) - Battery negative (-) Battery positive (+) - 8 (IG)
Battery negative (-) - 9 (ACTG)
11 to 14 V
3 (EDOR) - Battery negative (-)

If the result is not as specified, replace the door control battery.