Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › FRONT BUMPER(for Sedan with Rear Light) › 2017.10–2018.01
RM30M0E _59 Vehicle Exterior _017128 EXTERIOR PANELS / TRIM _0336517 FRONT BUMPER(for Sedan with Rear Light) A

EXTERIOR PANELS / TRIM  FRONT BUMPER(for Sedan with Rear Light)  REMOVAL  


PROCEDURE

Hide 53141F 1.REMOVE RADIATOR COVER

a.
B476436

Remove the 8 clips and radiator cover.


Hide 2.REMOVE RADIATOR GRILLE SUB-ASSEMBLY

a.
B476437

Remove the 2 clips.


b.

Remove the hood center cushion.


c.

Disengage the 6 claws to remove the radiator grille sub-assembly.


Hide 3.REMOVE FRONT BUMPER ASSEMBLY

a.
B476438C01
0,0 0,0 false
V100155

Protective Tape


Apply protective tape as shown in the illustration.


b.
B476439C01
1.094,3.854 1.385,3.448 true 1.885,3.333 2.458,3.094 true 0.927,3.771 1.156,3.99 0.229,0.219 10 false *a 2.51,2.99 2.74,3.208 0.229,0.219 10 false *1
*1 Pin Hold Clip
*a Protective Tape


Using a screwdriver wrapped with protective tape, disengage the 2 claws and remove the pin hold clip.

HINT:

Use the same procedure for the RH side and LH side.



c.

Remove the clip.

HINT:

Use the same procedure for the RH side and LH side.



d.
B476440

Remove the 6 screws.


e.
B476441

Using a clip remover, remove the 2 clips.


f.

Remove the bolt.


g.
B476442

Disengage the 10 claws to remove the front bumper assembly.


h.

w/ Fog Light:

i.

Disconnect the 2 fog light assembly connectors.



i.

w/ Daytime Running Light:

i.

Disconnect the 2 daytime running light assembly connectors.