Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › REAR BUMPER(for Sedan with Rear Light) › 2017.10–2018.01
RM30M0E _59 Vehicle Exterior _017128 EXTERIOR PANELS / TRIM _0336520 REAR BUMPER(for Sedan with Rear Light) A

EXTERIOR PANELS / TRIM  REAR BUMPER(for Sedan with Rear Light)  REMOVAL  


PROCEDURE

Hide 52592 1.REMOVE REAR BUMPER SIDE SEAL LH

B484278

a.

Using a clip remover, remove the clip.


b.

Remove the 2 screw grommets and rear bumper side seal LH.


Hide 52591 2.REMOVE REAR BUMPER SIDE SEAL RH

HINT:

Use the same procedure as for the LH side.


Hide 3.REMOVE REAR BUMPER ASSEMBLY

a.
B484279C01
0,0 0,0 false
V100155

Protective Tape


Apply protective tape as shown in the illustration.


b.
B484280

Remove the 2 clips.


c.
B484281

Remove the 2 clips and 2 screws.


d.
B484282

Disengage the 14 claws.


e.
B484283

Disengage the 4 claws and remove the rear bumper assembly.


f.

w/ Clearance Sonar System:

i.

Disconnect the connector.