Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › REAR BUMPER(for Hatchback) › from 2017.10
RM30M0E _59 Vehicle Exterior _017128 EXTERIOR PANELS / TRIM _0118068 REAR BUMPER(for Hatchback) A

EXTERIOR PANELS / TRIM  REAR BUMPER(for Hatchback)  REMOVAL  


PROCEDURE

Hide 52592 1.REMOVE REAR BUMPER SIDE SEAL LH

B484268

a.

Using a clip remover, remove the 2 clips.


b.

Remove the 2 screw grommets and the rear bumper side seal LH.


Hide 52591 2.REMOVE REAR BUMPER SIDE SEAL RH

HINT:

Use the same procedure as for the LH side.


Hide 3.REMOVE REAR BUMPER ASSEMBLY

a.
B484269C01
0,0 0,0 false
V100155

Protective Tape


Apply protective tape as shown in the illustration.


b.
B484270

Remove the 2 clips.


c.
B484271

Remove the 2 clips and 2 screws.


d.
B484272

Disengage the 8 claws.


e.
B484273

Disengage the 4 claws and remove the rear bumper assembly.


f.

w/ Clearance Sonar System:

i.

Disconnect the connector.