Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › REAR BUMPER(for Hatchback) › from 2017.10
RM30M0E _59 Vehicle Exterior _017128 EXTERIOR PANELS / TRIM _0118068 REAR BUMPER(for Hatchback) A

EXTERIOR PANELS / TRIM  REAR BUMPER(for Hatchback)  INSTALLATION  


PROCEDURE

Hide 1.INSTALL REAR BUMPER ASSEMBLY

a.

w/ Clearance Sonar System:

i.

Connect the connector.



b.

Engage the 4 claws and install the rear bumper assembly.


c.

Engage the 8 claws.


d.

Install the 2 clips and 2 screws.


e.

Install the 2 clips.


f.

Remove the protective tape.


Hide 52592 2.INSTALL REAR BUMPER SIDE SEAL LH

a.

Install the rear bumper side seal LH with the 2 screw grommets.


b.

Install the clip.


Hide 52591 3.INSTALL REAR BUMPER SIDE SEAL RH

HINT:

Use the same procedure as for the LH side.