81552A
1.REMOVE NO. 2 REAR COMBINATION LIGHT BODY GASKET
Remove the No. 2 rear combination light body gasket.
Be sure to remove all the traces of the old No. 2 rear combination light body gasket from the vehicle body.
Do not reuse the removed No. 2 rear combination light body gasket. Be sure to install a new No. 2 rear combination light body gasket to prevent water ingress.
81562A
2.REMOVE REAR COMBINATION LIGHT GASKET
Remove the rear combination light gasket.
Be sure to remove all the traces of the old rear combination light gasket from the vehicle body.
Do not reuse the removed rear combination light gasket. Be sure to install a new rear combination light gasket to prevent water ingress.
81550L
3.REMOVE REAR TURN SIGNAL LIGHT BULB
Turn the rear combination light socket and wire sub-assembly with the rear turn signal light bulb in the direction indicated by the arrow shown in the illustration, and separate them as a unit.
Remove the rear turn signal light bulb from the rear combination light socket and wire sub-assembly.
81550N
4.REMOVE BACK UP LIGHT BULB
Turn the rear combination light socket and wire sub-assembly with the back up light bulb in the direction indicated by the arrow shown in the illustration, and separate them as a unit.
Remove the back up light bulb from the rear combination light socket and wire sub-assembly.
81550H
5.REMOVE TAIL AND STOP LIGHT BULB
Turn the rear combination light socket and wire sub-assembly with the tail and stop light bulb in the direction indicated by the arrow shown in the illustration, and separate them as a unit.
Remove the tail and stop light bulb from the rear combination light socket and wire sub-assembly.
81565
6.REMOVE REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY
Disengage the 2 clamps to remove the rear combination light socket and wire sub-assembly.