Home › Vehicle Exterior › LIGHTING (EXT) › REAR COMBINATION LIGHT ASSEMBLY(for Sedan without Rear Light) › 2017.10–2018.01
RM30M0E _59 Vehicle Exterior _017126 LIGHTING (EXT) _0336752 REAR COMBINATION LIGHT ASSEMBLY(for Sedan without Rear Light) A

LIGHTING (EXT)  REAR COMBINATION LIGHT ASSEMBLY(for Sedan without Rear Light)  REASSEMBLY  


PROCEDURE

Hide 81565 1.INSTALL REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY

a.
E271803

Engage the 2 clamps to install the rear combination light socket and wire sub-assembly.


Hide 81550H 2.INSTALL TAIL AND STOP LIGHT BULB

a.

Install the tail and stop light bulb to the rear combination light socket and wire sub-assembly.


b.
E271802

Turn the rear combination light socket and wire sub-assembly with the tail and stop light bulb in the direction indicated by the arrow shown in the illustration to install them as a unit.


Hide 81550N 3.INSTALL BACK UP LIGHT BULB

a.

Install the back up light bulb to the rear combination light socket and wire sub-assembly.


b.
E271800

Turn the rear combination light socket and wire sub-assembly with the back up light bulb in the direction indicated by the arrow shown in the illustration to install them as a unit.


Hide 81550L 4.INSTALL REAR TURN SIGNAL LIGHT BULB

a.

Install the rear turn signal light bulb to the rear combination light socket and wire sub-assembly.


b.
E271683

Turn the rear combination light socket and wire sub-assembly with the rear turn signal light bulb in the direction indicated by the arrow shown in the illustration to install them as a unit.


Hide 81562A 5.INSTALL REAR COMBINATION LIGHT GASKET

a.
E271681

Install a new rear combination light gasket.

NOTICE:
·

Be sure to remove all the traces of the old rear combination light gasket from the vehicle body.

·

Do not reuse the removed rear combination light gasket. Be sure to install the rear combination light gasket to prevent water ingress.




Hide 81554B 6.INSTALL NO. 2 REAR COMBINATION LIGHT BODY GASKET

a.
E276242

Install a new No. 2 rear combination light body gasket.

NOTICE:
·

Be sure to remove all the traces of the old No. 2 rear combination light body gasket from the vehicle body.

·

Do not reuse the removed No. 2 rear combination light body gasket. Be sure to install the No. 2 rear combination light body gasket to prevent water ingress.