Home › Vehicle Interior › HEATING / AIR CONDITIONING › CONDENSER(for TMT Made) › 2017.10–2018.01
RM30M0E _58 Vehicle Interior _017118 HEATING / AIR CONDITIONING _0336781 CONDENSER(for TMT Made) A

HEATING / AIR CONDITIONING  CONDENSER(for TMT Made)  REASSEMBLY  


PROCEDURE

Hide 88474 1.INSTALL COOLER DRYER

a.
I109811

Using pliers, install the cooler dryer onto the modulator.


b.
I109805

Apply sufficient compressor oil to the O-ring and the fitting surface of the cap.

Compressor oil:

ND-OIL 8 or equivalent



c.
I109808C01
1.844,1.49 2.073,1.365 false 1.563,0.927 1.146,0.542 false 0.958,0.417 1.271,0.615 0.313,0.198 10 false *a 2.094,1.25 2.406,1.448 0.313,0.198 10 false *1
*1 Modulator
*a 14 mm Straight Hexagon Wrench


Using a 14 mm straight hexagon wrench, install the cap onto the modulator.

Torque:
2.9 N*m (30 kgf*cm, 26 in.*lbf)