Home › Vehicle Interior › HEATING / AIR CONDITIONING › CONDENSER(for TMMIN Made) › 2017.10–2018.01
RM30M0E _58 Vehicle Interior _017118 HEATING / AIR CONDITIONING _0336782 CONDENSER(for TMMIN Made) G

HEATING / AIR CONDITIONING  CONDENSER(for TMMIN Made)  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 88460 1.INSPECT COOLER CONDENSER ASSEMBLY

a.

If the fins of the cooler condenser assembly are dirty, clean them with water and dry them with compressed air.

NOTICE:

Do not damage the fins of the cooler condenser assembly.



b.

If the fins of the cooler condenser assembly are bent, straighten them using a screwdriver or pliers.


Hide 2.CHECK CONDENSER FOR REFRIGERANT LEAKAGE

a.

Check the pipe joints for gas leakage, using a halogen leak detector.


b.

Check the tightening torque of the joints if gas leakage is detected from any pipe joints.