Home › Vehicle Exterior › LIGHTING (EXT) › LICENSE PLATE LIGHT ASSEMBLY(for Sedan without Rear Light) › 2017.10–2018.01
RM30M0E _59 Vehicle Exterior _017126 LIGHTING (EXT) _0336920 LICENSE PLATE LIGHT ASSEMBLY(for Sedan without Rear Light) A

LIGHTING (EXT)  LICENSE PLATE LIGHT ASSEMBLY(for Sedan without Rear Light)  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the LH and RH sides.

·

The procedure described below is for the LH side.



PROCEDURE

Hide 81270B 1.INSTALL LICENSE PLATE LIGHT BULB

a.

Install the license plate light bulb to the license plate light housing.


Hide 81271 2.INSTALL LICENSE PLATE LIGHT LENS

a.

Engage the 2 claws to install the license plate light lens.


Hide 81274B 3.INSTALL LICENSE PLATE LIGHT PACKING

a.

Install a new license plate light packing.


Hide 81270 4.INSTALL LICENSE PLATE LIGHT ASSEMBLY

a.

Engage the 2 claws to install the license plate light assembly.


b.

Connect the connector.


Hide 76801A 5.INSTALL LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH SUB-ASSEMBLY