Home › Vehicle Interior › INTERIOR PANELS / TRIM › ROOF HEADLINING(for Sedan) › from 2018.01
RM30M0E _58 Vehicle Interior _017120 INTERIOR PANELS / TRIM _0089079 ROOF HEADLINING(for Sedan) A

INTERIOR PANELS / TRIM  ROOF HEADLINING(for Sedan)  REASSEMBLY  


PROCEDURE

Hide 82171 1.INSTALL NO. 1 ROOF WIRE

a.

Align the positioning tape of the No. 1 roof wire with the protrusion of the roof headlining and wrap new adhesive tape around them as shown in the part of the illustration labeled A.


b.

Align the No. 1 roof wire positioning tape with the markings of the roof headlining.


c.

Install the No. 1 roof wire onto the roof headlining with 13 new adhesive tapes.

B484828C01
4.969,2.125 5.177,2.281 false 5.115,2.271 5.427,2.427 0.313,0.156 10 false *a 0.771,1.365 0.927,1.573 0.156,0.208 10 false A
*a Marking - -
V100155

Adhesive Tape
V100143

Positioning Tape



Hide 86101J 2.INSTALL NO. 2 ANTENNA CORD SUB-ASSEMBLY

Hide 63343 3.INSTALL NO. 3 ROOF SILENCER PAD

a.

Align the marking on the roof headlining with the No. 3 roof silencer pad to install the No. 3 roof silencer pad using hot-melt glue as shown in the illustration.

B484826C01
4.406,1.417 3.813,2.51 true 3.74,2.542 4.052,2.698 0.313,0.156 10 false *a
*a Marking - -


NOTICE:

Securely attach the No. 3 roof silencer pad before the hot-melt glue cools.



Hide 63342 4.INSTALL NO. 2 ROOF SILENCER PAD

a.

Align the marking on the roof headlining with the No. 2 roof silencer pad to install the 3 No. 2 roof silencer pads using hot-melt glue as shown in the illustration.

B484824C01
4.406,1.406 5.625,2.208 true 5.656,2.104 5.969,2.26 0.313,0.156 10 false *a
*a Marking - -
V100155

Hot-melt NG Area - -


NOTICE:

Securely attach the No. 2 roof silencer pad before the hot-melt glue cools.



Hide 63341 5.INSTALL NO. 1 ROOF SILENCER PAD

a.

Align the markings on the roof headlining with the No. 1 roof silencer pad and install the No. 1 roof silencer pad using hot-melt glue as shown in the illustration.

B484822C01
2.885,1.396 3.552,2.615 true 3.594,2.531 3.906,2.688 0.313,0.156 10 false *a
*a Marking - -


NOTICE:

Securely attach the No. 1 roof silencer pad before the hot-melt glue cools.