1.INSTALL REAR SEATBACK ASSEMBLY
Place the rear seatback assembly in the cabin.
Be careful not to damage the vehicle body.
Engage the 3 hooks to install the rear seatback assembly.
Install the 3 bolts.
Connect the rear seat 3 point type outer belt assembly LH, rear seat 3 point type outer belt assembly RH and rear seat inner with center belt assembly LH into the 3 rear seat shoulder belt guides.
73480
2.CONNECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH
| *a | Convex |
| *b | Arrow Mark |
Connect the rear seat inner with center belt assembly LH with the bolt.
Install the anchor plate with the arrow mark facing forward.
Do not place the anchor plate over the convex area of the floor panel.
72693
3.INSTALL REAR SEAT CUSHION LOCK HOOK
Engage the 4 claws to install the 2 rear seat cushion lock hooks.
4.INSTALL REAR SEAT CUSHION ASSEMBLY
Pass the rear seat inner belt through the slit of the rear seat cushion assembly.
Be careful not to damage the vehicle body.
| *1 | Rear Side of Rear Seat Cushion Frame Hook |
| *2 | Rear Seat Cushion Lock Hook |
Align the rear side of the rear seat cushion frame with the 2 hooks.
Engage the 2 hooks with the rear seat cushion lock hooks to install the rear seat cushion assembly.
When installing the rear seat cushion assembly, make sure that the seat belt buckles are not under the rear seat cushion assembly.