Home › Vehicle Exterior › LIGHTING (EXT) › FOG LIGHT ASSEMBLY › from 2018.01
RM30M0E _59 Vehicle Exterior _017126 LIGHTING (EXT) _0346447 FOG LIGHT ASSEMBLY A

LIGHTING (EXT)  FOG LIGHT ASSEMBLY  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure described below is for the LH side.



PROCEDURE

Hide 81220 1.INSTALL FOG LIGHT ASSEMBLY

a.

Install the fog light assembly with the 3 screws.


b.

Connect the connector.


Hide 53876A 2.INSTALL FRONT FENDER LINER

a.

Install the front fender liner with the 3 screws.


b.

Engage the 2 claws to install the pin hold clip.


c.

Install the clip.