Use the same procedure for the RH and LH sides.
The procedure described below is for the LH side.
1.REMOVE REAR BUMPER ASSEMBLY
64711
2.REMOVE LUGGAGE COMPARTMENT FLOOR MAT
64770
3.REMOVE SPARE WHEEL COVER ASSEMBLY
64773D
4.REMOVE NO. 2 SPARE WHEEL COVER PAD
Use the same procedure for the RH sides.
Click hereVehicle Exterior>DOOR / HATCH>FUEL LID LOCK CONTROL CABLE ASSEMBLY(for Sedan LHD)>REMOVAL
58387
5.REMOVE REAR FLOOR FINISH PLATE
64722B
6.REMOVE NO. 2 LUGGAGE COMPARTMENT TRIM COVER
81560
7.REMOVE REAR COMBINATION LIGHT ASSEMBLY
for LH Side:
Disengage the clamp and disconnect the instrument panel wire.
Disconnect the connector.
Remove the 3 nuts and rear combination light assembly.