Home › Vehicle Exterior › WINDOW / GLASS › POWER WINDOW REGULATOR MOTOR(for Front Door) › from 2018.01
RM30M0E _59 Vehicle Exterior _017121 WINDOW / GLASS _0092744 POWER WINDOW REGULATOR MOTOR(for Front Door) A

WINDOW / GLASS  POWER WINDOW REGULATOR MOTOR(for Front Door)  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for both the LH and RH sides.

·

The procedure described below is for the LH side.



PROCEDURE

Hide 85720D 1.INSTALL POWER WINDOW REGULATOR MOTOR ASSEMBLY

a.

Apply MP grease to the sliding and rotating areas of the power window regulator motor assembly.


b.

Using a T25 "TORX" socket wrench, install the power window regulator motor assembly with 3 screws.

Torque:
5.4 N*m (55 kgf*cm, 48 in.*lbf)


Hide 69820 2.INSTALL FRONT DOOR WINDOW REGULATOR ASSEMBLY