Use the same procedure for LHD and RHD vehicles.
The procedure listed below is for the LHD vehicles.
84810
1.INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY
Engage the 3 claws to install the power window regulator switch assembly.
74231
2.INSTALL FRONT ARMREST BASE UPPER PANEL RH
Use the same procedure as for the LH side.
Click hereVehicle Exterior>DOOR / HATCH>FRONT DOOR>REASSEMBLY
74210
3.INSTALL FRONT ARMREST ASSEMBLY RH
Use the same procedure as for the LH side.
Click hereVehicle Exterior>DOOR / HATCH>FRONT DOOR>REASSEMBLY