Home › Vehicle Interior › HEATING / AIR CONDITIONING › CONDENSER › from 2018.01
RM30M0E _58 Vehicle Interior _017118 HEATING / AIR CONDITIONING _0090065 CONDENSER G

HEATING / AIR CONDITIONING  CONDENSER  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 88460 1.INSPECT COOLER CONDENSER ASSEMBLY

a.

If the fins of the cooler condenser are dirty, clean them with water and dry them with compressed air.

NOTICE:

Do not damage the fins of the cooler condenser assembly.



b.

If the fins of the cooler condenser assembly are bent, straighten them using a screwdriver or pliers.


Hide 2.CHECK CONDENSER FOR REFRIGERANT LEAKAGE

a.

Check the pipe joints for gas leakage, using a halogen leak detector.


b.

Check the tightening torque of the joints if gas leakage is detected from any pipe joints.