Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING PANEL(for Automatic Air Conditioning System) › from 2018.01
RM30M0E _58 Vehicle Interior _017118 HEATING / AIR CONDITIONING _0090075 AIR CONDITIONING PANEL(for Automatic Air Conditioning System) G

HEATING / AIR CONDITIONING  AIR CONDITIONING PANEL(for Automatic Air Conditioning System)  INSPECTION  


PROCEDURE

Hide 55900 1.INSPECT AIR CONDITIONING CONTROL ASSEMBLY

a.

Check the illumination.

i.
I113907C02
0.792,1.146 1.208,1.146 true 2.5,1.75 2.208,1.354 true 0.115,0.104 0.427,0.302 0.313,0.198 10 false *a 0.438,1.083 0.833,1.333 0.396,0.25 10 false GND 2.427,1.792 2.823,2.042 0.396,0.25 10 false ILL+
*a Component without harness connected
(Air Conditioning Control Assembly)


Apply battery voltage to the connector and check the illumination condition.

OK:
Measurement Condition Specified Condition
Battery positive (+) → 9 (ILL+)
Battery negative (-) → 8 (GND)
Illumination comes on


If the result is not as specified, replace the air conditioning control assembly.