Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH › from 2018.01
RM30M0E _59 Vehicle Exterior _017128 EXTERIOR PANELS / TRIM _0092442 LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH A

EXTERIOR PANELS / TRIM  LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH  REMOVAL  


PROCEDURE

Hide 81590A 1.REMOVE REAR LIGHT ASSEMBLY

Hide 76801A 2.REMOVE LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH SUB-ASSEMBLY

a.
B484309

While pulling the luggage compartment door outside garnish sub-assembly towards the back of the vehicle, disengage the 6 clips, and while peeling off the double-sided tape, remove the luggage compartment door outside garnish sub-assembly.


b.

Remove the 6 clips from the luggage compartment door outside garnish sub-assembly.


Hide 75895H 3.REMOVE NO. 1 MOULDING TAPE

a.
B484329

Remove the 2 No. 1 moulding tapes.


Hide 75825 4.REMOVE LUGGAGE COMPARTMENT DOOR MOULDING PAD

a.
B484330

Remove the 3 luggage compartment door moulding pads.