84945
1.INSPECT LUGGAGE ELECTRICAL KEY SWITCH
| *a | Component without harness connected
(Luggage Electrical Key Switch) |
| *b | Pushed |
| *c | Not Pushed |
Check the resistance.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Switch Condition | Specified Condition |
|---|---|---|
| 1 - 2 | Pushed | Below 1 Ω |
| 1 - 2 | Not pushed | 10 kΩ or higher |
If the result is not as specified, replace the luggage electrical key switch.