Home › Vehicle Interior › DOOR LOCK › DOOR CONTROL SWITCH › from 2018.01
RM30M0E _58 Vehicle Interior _017110 DOOR LOCK _0087446 DOOR CONTROL SWITCH G

DOOR LOCK  DOOR CONTROL SWITCH  INSPECTION  


PROCEDURE

Hide 84820 1.INSPECT POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (for LHD)

a.
B488479C01
1.313,3.417 1.917,2.656 true 2.167,3.417 2.604,2.906 true 2.323,3.427 2.74,3.25 true 0.271,2.646 0.583,2.802 0.313,0.156 10 false *a 1.969,2.563 2.281,2.719 0.313,0.156 10 false UL 2.667,2.823 2.979,2.979 0.313,0.156 10 false L 2.802,3.177 3.115,3.333 0.313,0.156 10 false E
*a Component without harness connected
(Power Window Regulator Master Switch Assembly)


Check the resistance.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
2 (L) - 1 (E) Lock switch pushed Below 1 Ω
2 (L) - 1 (E) off 10 kΩ or higher
8 (UL) - 1 (E) Unlock switch pushed Below 1 Ω
8 (UL) - 1 (E) off 10 kΩ or higher


If the result is not as specified, replace the power window regulator master switch assembly.



Hide 84820 2.INSPECT POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (for RHD)

a.
B470613C02
1.302,3.406 1.5,2.667 true 2.146,3.406 2.417,2.667 true 1.135,3.417 0.802,3.198 true 0.667,2.5 0.979,2.656 0.313,0.156 10 false *a 2.5,2.563 2.813,2.76 0.313,0.198 10 false UL 1.573,2.521 1.729,2.719 0.156,0.198 10 false L 0.635,3.104 0.792,3.302 0.156,0.198 10 false E
*a Component without harness connected
(Power Window Regulator Master Switch Assembly)


Check the resistance.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
8 (L) - 9 (E) Lock switch pushed Below 1 Ω
8 (L) - 9 (E) off 10 kΩ or higher
2 (UL) - 9 (E) Unlock switch pushed Below 1 Ω
2 (UL) - 9 (E) off 10 kΩ or higher


If the result is not as specified, replace the power window regulator master switch assembly.