Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › STEERING ANGLE SENSOR › from 2018.01
RM30M0E _54 Brake _017098 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0262396 STEERING ANGLE SENSOR A

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  STEERING ANGLE SENSOR  REMOVAL  


PROCEDURE

Hide 84306 1.REMOVE SPIRAL CABLE SUB-ASSEMBLY

Hide 2.REMOVE STEERING SENSOR

a.
C381048C01
1.094,0.75 1.625,0.979 1.625,0.979 1.073,1.188 true 0.26,0.563 0.604,0.917 true 2.802,0.896 3.125,0.531 true 1.677,0.896 1.99,1.052 0.313,0.156 10 false *a 0.073,0.469 0.385,0.625 0.313,0.156 10 false *b 3.146,0.406 3.375,0.615 0.229,0.208 10 false *b
*a Guide
*b Pin


Disengage the 6 claws, 2 pins and 2 guides, and remove the steering sensor from the spiral cable sub-assembly.

NOTICE:

Do not damage the pins of the spiral cable sub-assembly or guides of the steering sensor.