Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › VEHICLE STABILITY CONTROL SYSTEM › from 2018.01
RM30M0E _54 Brake _017098 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0256246 VEHICLE STABILITY CONTROL SYSTEM C

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  VEHICLE STABILITY CONTROL SYSTEM  C1273  Low Output Signal of Rear Speed Sensor RH (Test Mode DTC)  C1274  Low Output Signal of Rear Speed Sensor LH (Test Mode DTC)  C1403  Rear Speed Sensor RH Malfunction  C1404  Rear Speed Sensor LH Malfunction  


DESCRIPTION

The speed sensor detects wheel speed and sends the appropriate signals to the skid control ECU (brake actuator assembly). These signals are used for brake control.

Speed sensor rotors have rows of alternating N and S magnetic poles, and their magnetic fields change when the rotors turn.

Each speed sensor detects that magnetic change and sends a pulse signal to the skid control ECU (brake actuator assembly).

HINT:

When the connectors between the speed sensor and skid control ECU (brake actuator assembly) are connected, the following waveform is output.


C280114C08
1.594,0.865 1.5,0.729 1.5,0.729 1.323,0.469 true 2.604,1.458 2.448,1.458 2.448,1.458 2.167,1.458 true 1.156,0.385 1.469,0.542 0.313,0.156 10 false *1 2.667,1.385 2.979,1.542 0.313,0.156 10 false *2 3.406,0.354 3.719,0.51 0.313,0.156 10 false *a 4.271,2 4.583,2.156 0.313,0.156 10 false *b 5.229,1.99 5.542,2.146 0.313,0.156 10 false *c 6.063,1.281 6.448,1.49 0.385,0.208 10 false 1.4 V 6.063,1.615 6.448,1.823 0.385,0.208 10 false 0.7 V
*1 Speed Sensor *2 Speed Sensor Rotor
*a Waveform (Reference):
Between speed sensor (-) and body ground
*b Low speed
*c High speed - -


DTC No. Detection Item DTC Detection Condition Trouble Area
C1273 Low Output Signal of Rear Speed Sensor RH (Test Mode DTC) Detected only during Test Mode.
·

Rear speed sensor RH (Rear axle hub and bearing assembly RH)

·

Sensor installation

·

Speed sensor rotor (Rear axle hub and bearing assembly RH)


C1274 Low Output Signal of Rear Speed Sensor LH (Test Mode DTC) Detected only during Test Mode.
·

Rear speed sensor LH (Rear axle hub and bearing assembly LH)

·

Sensor installation

·

Speed sensor rotor (Rear axle hub and bearing assembly LH)


C1403 Rear Speed Sensor RH Malfunction Any of the following is detected:
1.

At a vehicle speed of 10 km/h (6 mph) or more, output voltage from one of the speed sensors is less than that from the other sensors for 15 seconds or more.

2.

At a vehicle speed less than 10 km/h (6 mph), output from one of the speed sensors is 0 km/h (0 mph) for 1 second or more.

3.

At a vehicle speed less than 10 km/h (6 mph), outputs from both speed sensors are 0 km/h (0 mph) for 15 seconds or more. (except when both rear speed sensors are 0 km/h)


·

Rear speed sensor RH (Rear axle hub and bearing assembly RH)

·

Speed sensor rotor (Rear axle hub and bearing assembly RH)


C1404 Rear Speed Sensor LH Malfunction Any of the following is detected:
1.

At a vehicle speed of 10 km/h (6 mph) or more, output voltage from one of the speed sensors is less than that from the other sensors for 15 seconds or more.

2.

At a vehicle speed less than 10 km/h (6 mph), output from one of the speed sensors is 0 km/h (0 mph) for 1 second or more.

3.

At a vehicle speed less than 10 km/h (6 mph), outputs from both speed sensors are 0 km/h (0 mph) for 15 seconds or more. (except when both rear speed sensors are 0 km/h)


·

Rear speed sensor LH (Rear axle hub and bearing assembly LH)

·

Speed sensor rotor (Rear axle hub and bearing assembly LH)



WIRING DIAGRAM

C349106E05
0.271,0.875 3.333,1.073 3.063,0.198 10 false Rear Speed Sensor LH 0.271,2.677 3.333,2.875 3.063,0.198 10 false Rear Speed Sensor RH 3.625,0.625 4.083,0.823 0.458,0.198 10 false OF1 3.625,1.167 4.083,1.365 0.458,0.198 10 false OF1 3.635,2.417 4.094,2.615 0.458,0.198 10 false PF1 3.635,2.948 4.094,3.146 0.458,0.198 10 false PF1 2.49,1.542 5.552,1.74 3.063,0.198 10 false Skid Control Sensor Wire LH 2.49,3.333 5.552,3.531 3.063,0.198 10 false Skid Control Sensor Wire RH 2.563,0.625 3.021,0.823 0.458,0.198 10 false O1 2.563,1.156 3.021,1.354 0.458,0.198 10 false O1 2.563,2.406 3.021,2.604 0.458,0.198 10 false P1 2.563,2.948 3.021,3.146 0.458,0.198 10 false P1 2.167,0.625 2.625,0.823 0.458,0.198 10 false RL+ 2.198,1.156 2.656,1.354 0.458,0.198 10 false RL- 2.146,2.406 2.604,2.604 0.458,0.198 10 false RR+ 2.177,2.948 2.635,3.146 0.458,0.198 10 false RR- 2.615,0.979 3.073,1.177 0.458,0.198 10 false 1 2.615,0.458 3.073,0.656 0.458,0.198 10 false 2 2.615,2.24 3.073,2.438 0.458,0.198 10 false 2 2.615,2.771 3.073,2.969 0.458,0.198 10 false 1 3.719,0.979 4.177,1.177 0.458,0.198 10 false 2 3.719,0.458 4.177,0.656 0.458,0.198 10 false 1 3.719,2.24 4.177,2.438 0.458,0.198 10 false 1 3.719,2.771 4.177,2.969 0.458,0.198 10 false 2 0.25,4 4.708,4.198 4.458,0.198 10 false *1: except LHD with Continuously Variable Transaxle 0.25,4.333 4.677,4.604 4.427,0.271 10 false *2: for LHD with Continuously Variable Transaxle 5.479,3.417 7.052,4 1.573,0.583 10 false Skid Control ECU (Brake Actuator Assembly) 5.458,0.625 5.917,0.823 0.458,0.198 10 false A49 5.135,0.625 5.594,0.823 0.458,0.198 10 false A48 5.813,0.625 7.156,0.844 1.344,0.219 10 false RL+ 5.813,1.156 7.156,1.375 1.344,0.219 10 false RL- 5.813,2.406 7.156,2.625 1.344,0.219 10 false RR+ 5.813,2.948 7.156,3.167 1.344,0.219 10 false RR- 5.458,1.156 5.917,1.354 0.458,0.198 10 false A49 5.135,1.156 5.594,1.354 0.458,0.198 10 false A48 5.458,2.406 5.917,2.604 0.458,0.198 10 false A49 5.135,2.406 5.594,2.604 0.458,0.198 10 false A48 5.135,2.948 5.594,3.146 0.458,0.198 10 false A48 5.458,2.948 5.917,3.146 0.458,0.198 10 false A49 5.531,0.448 5.99,0.646 0.458,0.198 10 false 5 5.219,0.448 5.677,0.646 0.458,0.198 10 false 5 5.5,0.813 5.958,1.01 0.458,0.198 10 false *2 5.177,0.813 5.635,1.01 0.458,0.198 10 false *1 5.531,0.979 5.99,1.177 0.458,0.198 10 false 4 5.219,0.979 5.677,1.177 0.458,0.198 10 false 4 5.5,1.354 5.958,1.552 0.458,0.198 10 false *2 5.177,1.354 5.635,1.552 0.458,0.198 10 false *1 5.521,2.583 5.979,2.781 0.458,0.198 10 false *2 5.146,2.604 5.604,2.802 0.458,0.198 10 false *1 5.146,3.135 5.604,3.333 0.458,0.198 10 false *1 5.521,3.135 5.979,3.333 0.458,0.198 10 false *2 5.177,2.229 5.635,2.427 0.458,0.198 10 false 17 5.5,2.229 5.958,2.427 0.458,0.198 10 false 17 5.5,2.771 5.958,2.969 0.458,0.198 10 false 16 5.177,2.771 5.635,2.969 0.458,0.198 10 false 16

CAUTION / NOTICE / HINT

NOTICE:

Disassembly of the speed sensor from the rear axle hub and bearing assembly is prohibited.


PROCEDURE

1.CHECK REAR SPEED SENSOR INSTALLATION
a.

Turn the ignition switch off.


b.
C118693C01
0.676,0.188 0.859,0.363 0.183,0.176 10 *a 2.229,0.188 2.412,0.363 0.183,0.176 10 *b 1.738,1.666 1.923,1.836 0.185,0.17 10 *c
*a Normal
*b Abnormal
*c Clearance


Check the speed sensor installation.

OK:

There is no clearance between the sensor and the rear axle hub.


HINT:

Because the rear axle hub and bearing assembly cannot be disassembled, if the rear speed sensor needs replacement, replace the rear axle hub and bearing assembly.



Result:
Proceed to
OK
NG



OK

2.READ VALUE USING GTS (REAR SPEED SENSOR)

NG

REPLACE REAR AXLE HUB AND BEARING ASSEMBLY

2.READ VALUE USING GTS (REAR SPEED SENSOR)
a.

Connect the GTS to the DLC3.


b.

Start the engine.


c.

Turn the GTS on.


d.

Enter the following menus: Chassis / ABS/VSC/TRC / Data List.


e.

According to the display on the GTS, read the Data List.


Chassis > ABS/VSC/TRC > Data List
Tester Display Measurement Item Range Normal Condition Diagnostic Note
RR Wheel Speed Rear wheel speed sensor RH reading Min.: 0 km/h (0 mph)
Max.: 326.4 km/h (202 mph)
Vehicle stopped: 0 km/h (0 mph) When driving at constant speed: No large fluctuations
RL Wheel Speed Rear wheel speed sensor RH reading Min.: 0 km/h (0 mph)
Max.: 326.4 km/h (202 mph)
Vehicle stopped: 0 km/h (0 mph) When driving at constant speed: No large fluctuations
Chassis > ABS/VSC/TRC > Data List
Tester Display
RR Wheel Speed
RL Wheel Speed
50003 105 3,4
f.

Check that there is no difference between the speed value output from the speed sensor displayed on the GTS and the speed value displayed on the speedometer when driving the vehicle.

HINT:

Factors that affect the indicated vehicle speed include tire size, tire inflation, and tire wear. The speed indicated on the speedometer has an allowable margin of error. This can be tested using a speedometer tester (calibrated chassis dynamometer). For details about testing and the margin of error, see the reference chart.

Click hereVehicle Interior>METER / GAUGE / DISPLAY>METER / GAUGE SYSTEM>ON-VEHICLE INSPECTION


OK:

The speed value output from the speed sensor displayed on the GTS is the same as the actual vehicle speed measured using a speedometer tester (calibrated chassis dynamometer).


NOTICE:

Check the speed sensor signal after replacement.

Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>VEHICLE STABILITY CONTROL SYSTEM>TEST MODE PROCEDURE


HINT:
·

The rear speed sensor and rear speed sensor rotor are incorporated into the rear axle hub and bearing assembly.

If the rear speed sensor rotor needs to be replaced, replace it together with the rear axle hub and bearing assembly with rear speed sensor.

·

If troubleshooting has been carried out according to the Problem Symptoms Table, refer back to the table and proceed to the next step.

Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>VEHICLE STABILITY CONTROL SYSTEM>PROBLEM SYMPTOMS TABLE




Result:
Proceed to
OK
NG



OK

NG

REPLACE REAR AXLE HUB AND BEARING ASSEMBLY