Home › Steering › POWER ASSIST SYSTEMS › POWER STEERING SYSTEM › from 2018.01
RM30M0E _55 Steering _017103 POWER ASSIST SYSTEMS _0090108 POWER STEERING SYSTEM C

POWER ASSIST SYSTEMS  POWER STEERING SYSTEM  U0100  Lost Communication with ECM / PCM "A"  U0129  Lost Communication with Brake System Control Module  


DESCRIPTION

The power steering ECU assembly receives signals from the ECM and skid control ECU (brake actuator assembly) via CAN communication.

DTC No. Detection Item DTC Detection Condition Trouble Area Warning Indicate Return-to-normal Condition Note
U0100 Lost Communication with ECM / PCM "A" Lost communication with ECM
·

CAN communication system

·

ECM


EPS warning light: When an error occurs during steering assist, the warning light does not illuminate. For errors that occur before assist (at the time of the decision to start assist), the warning light illuminates. After normal confirmation -
U0129 Lost Communication with Brake System Control Module Lost communication with skid control ECU (Brake actuator assembly)
·

CAN communication system

·

Skid control ECU (Brake actuator assembly)


EPS warning light: Comes on After normal confirmation -

PROCEDURE

1.GO TO CAN COMMUNICATION SYSTEM

Result:
Proceed to
NEXT



NEXT

END