Home › Audio / Visual / Telematics › AUDIO / VIDEO › FRONT DOOR SPEAKER › from 2018.01
RM30M0E _56 Audio / Visual / Telematics _017106 AUDIO / VIDEO _0089068 FRONT DOOR SPEAKER G

AUDIO / VIDEO  FRONT DOOR SPEAKER  INSPECTION  


PROCEDURE

Hide 86160 1.INSPECT FRONT NO. 1 SPEAKER ASSEMBLY

a.

Visually check the speaker.

OK:

The cone paper of the front No. 1 speaker assembly is not torn.


If the result is not as specified, replace the front No. 1 speaker assembly.


b.
E192950C04
0.073,0.052 0.385,0.25 0.313,0.198 10 false *a
*a Component without harness connected (Front No. 1 Speaker Assembly)


Check the resistance.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 Always 4 Ω


If the result is not as specified, replace the front No. 1 speaker assembly.