Home › Vehicle Interior › DOOR LOCK › WIRELESS DOOR LOCK CONTROL SYSTEM(w/o Smart Entry and Start System) › from 2018.01
RM30M0E _58 Vehicle Interior _017110 DOOR LOCK _0091390 WIRELESS DOOR LOCK CONTROL SYSTEM(w/o Smart Entry and Start System) D

DOOR LOCK  WIRELESS DOOR LOCK CONTROL SYSTEM(w/o Smart Entry and Start System)  SYSTEM DESCRIPTION  


WIRELESS DOOR LOCK CONTROL SYSTEM


The wireless door lock control system can be used to lock and unlock all doors from a distance. The system is controlled by a door control transmitter assembly which sends radio waves to the door control receiver. The body computer performs an ID code identification process and operates the door lock control.


FUNCTION OF MAIN COMPONENTS


Component Function
Door control transmitter assembly
·

Has the lock and unlock switches.*1

·

Has the lock, unlock and luggage open switches.*2

·

Transmits weak radio waves (recognition codes and function codes) to the door control receiver.


Door control receiver Receives weak radio waves from the door control transmitter assembly and sends them to the body computer.
Front door courtesy light switch assembly LH*3
Front door courtesy light switch assembly RH*4
·

Placed on driver door.

·

Turns on when a door is opened and turns off when it is closed.

·

Outputs door status signals (open or closed) to the body computer.


Front door courtesy light switch assembly RH*3
Front door courtesy light switch assembly LH*4
Rear door courtesy light switch assembly RH
Rear door courtesy light switch assembly LH
·

Placed on each door.

·

Turns on when a door is opened and turns off when it is closed.

·

Outputs door status signals (open or closed) to the combination meter assembly.


Combination meter assembly Sends the courtesy switch signal to the body computer.
Unlock warning switch assembly Detects if the key is inserted in the ignition key cylinder or not.
Front door lock assembly LH*3
Front door lock assembly RH*4
·

The built-in motor locks or unlocks the door.

·

The built-in unlock detection switch detects the door status (locked or unlocked) and outputs a signal to the body computer. This switch turns off when the door is locked and turns on when the door is unlocked.


Front door lock assembly RH*3
Front door lock assembly LH*4
Rear door lock assembly LH
Rear door lock assembly RH
·

The built-in motor locks or unlocks the door.

·

The built-in unlock detection switch detects the door status (locked or unlocked) and outputs a signal to the certification ECU (smart key ECU assembly). This switch turns off when the door is locked and turns on when the door is unlocked.


Back door lock assembly*1 The built-in courtesy switch detects the back door status (open or closed) and outputs a signal to the body computer. This switch turns on when the back door is opened and turns off when the back door is closed.
Luggage compartment door lock assembly*2
·

The built-in motor unlatches the door latch.

·

Performs luggage compartment door open operation according to locked/unlocked state determination of the body computer.

·

The built-in courtesy switch detects the luggage compartment door status (open or closed) and outputs a signal to the main body ECU (multiplex network body ECU). This switch turns on when the luggage compartment door is opened and turns off when the luggage compartment door is closed.


Body computer Sends wireless door lock control signals in response to the code data from the door control receiver and signals from each switch.

*1: for Hatchback

*2: for Sedan

*3: for LHD

*4: for RHD



SYSTEM FUNCTION


The door control transmitter assembly has the lock and unlock switches. Operating these switches activates each function.

The wireless door lock control system has the following functions:

Function Operation
All door lock Pressing the lock switch locks all doors.
Automatic lock If none of the doors are opened within 30 seconds after they are unlocked by wireless door lock control, all doors will lock again automatically.
Answer back (Hazard warning light)
·

When the doors are locked by wireless operation, the hazard warning lights flash once.

·

When the doors are unlocked by wireless operation, the hazard warning lights flash twice.


Luggage compartment door open*1 Pressing the luggage door open switch of the door control transmitter assembly for longer than about 0.8 seconds opens the luggage compartment door.
Illuminated entry When all doors are locked, pressing the unlock switch causes the interior lights to come on simultaneously with the unlock operation.
Self-diagnostic mode If the door control receiver receives normal radio waves from the door control transmitter assembly when the system is in diagnostic mode, it flashes the interior lights in a normal pattern that corresponds to the function of each switch.
Transmitter recognition code registration Enables registration (writing and storing) of door control transmitter assembly recognition codes in the EEPROM that is contained in the door control receiver.

*1: for Sedan



TRANSMITTER RECOGNITION CODE REGISTRATION FUNCTION


The table below shows the 4 ID registration function modes. The codes are electronically registered (written and stored) in the EEPROM that is contained in the door control receiver.

Mode Function
Add mode Adds a newly received code while preserving any previously registered codes.
This mode is used when adding a new door control transmitter assembly. If the maximum registration number is exceeded, the oldest one is cleared first.
Rewrite mode Clears all previously registered codes and registers only newly input codes.
Confirmation mode Confirms how many codes are currently registered. When adding a new code, this mode is used to check how many codes already exist.
Prohibition mode Deletes all registered codes and disables the wireless door lock function.
This mode is used when the door control transmitter assembly is lost.


CONDITIONS THAT WIRELESS FUNCTIONS DO NOT OPERATE


a.

The lock function will not operate when either of the following conditions is met:

·

Any of the doors are open.

·

The key is inserted in the ignition key cylinder.



b.

The unlock function will not operate when the following condition is met:

·

The key is inserted in the ignition key cylinder.