Home › Vehicle Exterior › BODY PANEL › QUARTER WHEEL HOUSING OUTER PANEL › 2020.03–2020.07
BM36W0E _01 Vehicle Exterior _088117 BODY PANEL _0420578 QUARTER WHEEL HOUSING OUTER PANEL F

BODY PANEL  QUARTER WHEEL HOUSING OUTER PANEL  CUT AND JOIN REPLACEMENT SECTIONS  


K156377

With the rocker rear panel cut and join replacement and back door opening trough cut and join replacement removed.


REMOVAL


Symbol Meaning
K108818

Remove Weld Points
K108819

Remove Weld Points
K108820

Remove Weld Points
K108827

Cut and Join Location

a.

Remove the A.

HINT:

A is reused.


K156321N01
5.25,1.333 5.083,1.333 5.083,1.333 4.563,1.917 false 5.313,1.24 5.469,1.438 0.156,0.198 10 false A


b.

Roughly cut open the panel so that the adhesive can be reached. Cut through the adhesive with a cut chisel to remove the panel.

HINT:

In cases where the adhesive cannot be removed with a cut chisel, heat the adhesive with an industrial heater gun or gas burner taking care not to cause panel deformation by overheating.


K156323C01
0,0 0,0 false
K108837

Adhesive - -



c.

Remove the quarter wheel house panel outer.

K156327C01
4.271,1.333 4.583,1.49 0.313,0.156 10 false *a 2.74,0.75 3.052,0.906 0.313,0.156 10 false *b
*a 100 mm (3.94 in.) *b 45 mm (1.77 in.)


K156325C01
3.365,3.281 3.75,3.917 3.75,3.917 3.917,3.917 false 3.979,3.823 4.292,3.979 0.313,0.156 10 false *1
*1 QUARTER WHEEL HOUSE PANEL OUTER - -




INSTALLATION


Symbol Meaning
K108821

Spot Weld
K108823

Plug Weld
K108824

Plug Weld
K108825

Plug Weld
K108831

Butt Weld
K108835

Assembly Mark

a.

For positioning of the new parts, align the installation standard holes of the outer panel and the inner panel.

K156324


b.

Apply adhesive (3MTM AutomixTM Panel Bonding Adhesive #8115).

HINT:
·

Do not apply adhesive around the plug welding points.

·

Minimize squeeze out in plug welding areas.



K156323C01
0,0 0,0 false
K108837

Adhesive - -



c.

Weld the quarter wheel house panel outer to the vehicle side.

K156328

K156326C01
3.917,3.917 3.75,3.917 3.75,3.917 3.344,3.344 false 3.979,3.833 4.292,3.99 0.313,0.156 10 false *1
*1 QUARTER WHEEL HOUSE PANEL OUTER - -



d.

Weld the A to the vehicle side.

K156322N01
4.573,1.906 5,1.417 5,1.417 5.167,1.417 false 5.26,1.344 5.417,1.542 0.156,0.198 10 false A


e.

After welding, apply body sealer and undercoating to the corresponding parts. (See the painting/coating)


f.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.