Home › Vehicle Exterior › BODY PANEL › BACK DOOR OPENING TROUGH › 2020.03–2020.07
BM36W0E _01 Vehicle Exterior _088117 BODY PANEL _0420579 BACK DOOR OPENING TROUGH F

BODY PANEL  BACK DOOR OPENING TROUGH  CUT AND JOIN REPLACEMENT SECTIONS  


K156378

With the quarter panel cut and join replacement sections (large areas) and body lower back panel removed.


REMOVAL


Symbol Meaning
K108818

Remove Weld Points
K108827

Cut and Join Location

K156178C01
4.021,1.052 4.333,1.25 0.313,0.198 10 false *a
*a 165 mm (6.50 in.) - -



INSTALLATION


Symbol Meaning
K108823

Plug Weld
K108831

Butt Weld

a.

Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.


b.

Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimension diagram)

K156179C01
2.167,2.833 2.333,2.833 2.333,2.833 3.25,2.25 false 1.979,2.75 2.292,2.906 0.313,0.156 10 false *1
*1 BACK DOOR OPENING SIDE REINFORCE SUB-ASSEMBLY - -



c.

After welding, apply body sealer to the corresponding parts. (See the painting /coating)


d.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.