Home › Vehicle Exterior › BODY PANEL › FRONT DOOR OUTER PANEL › 2020.03–2020.07
BM36W0E _01 Vehicle Exterior _088117 BODY PANEL _0420590 FRONT DOOR OUTER PANEL F

BODY PANEL  FRONT DOOR OUTER PANEL  ASSEMBLY REPLACEMENT  


K156532

REMOVAL


Symbol Meaning
K108827

Cut and Join Location

a.

Roughly cut open the panel so that the adhesive can be reached. Cut through the adhesive with a cut chisel to remove the panel.

HINT:

In cases where the adhesive cannot be removed with a cut chisel, heat the adhesive with an industrial heater gun or gas burner taking care not to cause panel deformation by overheating.


K156678C01
0,0 0,0 false
K108837

Adhesive - -



b.

After grinding off the hemming location, remove the outer panel.

K156410C01
6.417,2.667 6.25,2.667 6.25,2.667 6.083,2.417 false 6.469,2.563 6.781,2.719 0.313,0.156 10 false *a 5.969,0.542 6.281,0.698 0.313,0.156 10 false *b
*a Disc Sander *b Hemming Location




INSTALLATION


Symbol Meaning
K108831

Butt Weld
K108833

Spot MIG Weld
K108834

Body Sealer

a.

Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.


b.

Apply adhesive (3MTM AutomixTM Panel Bonding Adhesive #8115).

NOTICE:

Do not close the drain hole.


HINT:

Apply enough adhesive to the panels.


K156679C01
5.833,2.917 6.146,3.073 0.313,0.156 10 false *a
*a Drain Hole - -
K108837

Adhesive - -



c.

Before temporarily installing the new parts, apply body sealer to the backside of the new parts.

HINT:

Apply enough body sealer to the panels.


K156411


d.

Bend the flange hem with a wooden hammer and dolly.

HINT:

Bend the panel gradually so as not to distort it.


K156412C01
3.25,3.75 3.083,3.75 3.083,3.75 2.729,3.354 false 5.781,5.375 5.917,5.083 5.917,5.083 6.083,5.083 false 6.25,6.083 6.083,6.083 6.083,6.083 5.938,5.844 false 5,6.333 5.167,6.333 5.167,6.333 5.26,6.094 false 3.313,3.667 3.625,3.823 0.313,0.156 10 false *1 6.146,5 6.458,5.156 0.313,0.156 10 false *a 6.313,6 6.625,6.156 0.313,0.156 10 false *b 4.813,6.25 5.125,6.406 0.313,0.156 10 false *c
*1 FRONT DOOR PANEL OUTER - -
*a Cloth Tape *b Dolly
*c Wooden Hammer - -



e.

After welding, apply body sealer to the corresponding parts. (See the painting/coating)


f.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.