Home › Vehicle Exterior › PAINTING / COATING › BODY PANEL UNDERCOATING (for TMMF Made) › 2020.07–2021.08
BM36W0E _01 Vehicle Exterior _088196 PAINTING / COATING _0431570 BODY PANEL UNDERCOATING(for TMMF Made) F

PAINTING / COATING  BODY PANEL UNDERCOATING(for TMMF Made)  APPLICATION AREAS  


CAUTION:

Work must be performed while wearing the appropriate protective gear and in a well-ventilated area.


1.

Apply undercoating to the chassis, floor underside, sheet metal fitting weld points of the body, and inside of the wheel house to prevent rust and noise, as well as protect the body from gravel.

NOTICE:

Do not coat high temperature areas, such as the tailpipe, or moving parts, such as the drive shaft.


HINT:
·

Apply degreasing agent to a clean cloth and clean any dirt and oil from the application areas.

·

Cover the surrounding areas of the application areas with masking paper to avoid coating unnecessary areas.

·

Apply body sealer to the panel joints in advance.

·

Do not leave any gaps between the panel joints.

·

Referring to the notes above, undercoating should be applied according to the specifications for your country.




for Gasoline Model


K157642C01
0.333,5.083 6.833,8.75 6.5,3.667 0.333,6.917 6.833,6.917 false 0.417,5.177 0.729,5.333 0.313,0.156 10 false *C 0.417,7 0.729,7.156 0.313,0.156 10 false *D 0.104,0.083 0.417,0.281 0.313,0.198 10 false *A 0.104,0.333 0.417,0.531 0.313,0.198 10 false *B
*A for LHD *B w/ Floor Under Cover
*C LH Side *D RH Side


K157641C01
0.333,5.083 6.833,8.75 6.5,3.667 0.333,6.917 6.833,6.917 false 0.417,5.177 0.729,5.333 0.313,0.156 10 false *C 0.417,7 0.729,7.156 0.313,0.156 10 false *D 0.104,0.083 0.417,0.281 0.313,0.198 10 false *A 0.104,0.333 0.417,0.531 0.313,0.198 10 false *B
*A for LHD *B w/o Floor Under Cover
*C LH Side *D RH Side


K157644C01
0.333,5.083 6.833,8.75 6.5,3.667 0.333,6.917 6.833,6.917 false 0.417,5.177 0.729,5.333 0.313,0.156 10 false *C 0.417,7 0.729,7.156 0.313,0.156 10 false *D 0.104,0.083 0.417,0.281 0.313,0.198 10 false *A 0.104,0.333 0.417,0.531 0.313,0.198 10 false *B
*A for RHD *B w/ Floor Under Cover
*C LH Side *D RH Side


K157643C01
0.333,5.083 6.833,8.75 6.5,3.667 0.333,6.917 6.833,6.917 false 0.417,5.177 0.729,5.333 0.313,0.156 10 false *C 0.417,7 0.729,7.156 0.313,0.156 10 false *D 0.104,0.083 0.417,0.281 0.313,0.198 10 false *A 0.104,0.333 0.417,0.531 0.313,0.198 10 false *B
*A for RHD *B w/o Floor Under Cover
*C LH Side *D RH Side



for HV Model


K157646C01
0.333,5.083 6.833,8.75 6.5,3.667 0.333,6.917 6.833,6.917 false 0.417,5.177 0.729,5.333 0.313,0.156 10 false *C 0.417,7 0.729,7.156 0.313,0.156 10 false *D 0.104,0.083 0.417,0.281 0.313,0.198 10 false *A 0.104,0.333 0.417,0.531 0.313,0.198 10 false *B
*A for LHD *B w/ Floor Under Cover
*C LH Side *D RH Side


K157645C01
0.333,5.083 6.833,8.75 6.5,3.667 0.333,6.917 6.833,6.917 false 0.417,5.177 0.729,5.333 0.313,0.156 10 false *C 0.417,7 0.729,7.156 0.313,0.156 10 false *D 0.104,0.083 0.417,0.281 0.313,0.198 10 false *A 0.104,0.333 0.417,0.531 0.313,0.198 10 false *B
*A for LHD *B w/o Floor Under Cover
*C LH Side *D RH Side


K157648C01
0.333,5.083 6.833,8.75 6.5,3.667 0.333,6.917 6.833,6.917 false 0.417,5.177 0.729,5.333 0.313,0.156 10 false *C 0.417,7 0.729,7.156 0.313,0.156 10 false *D 0.104,0.083 0.417,0.281 0.313,0.198 10 false *A 0.104,0.333 0.417,0.531 0.313,0.198 10 false *B
*A for RHD *B w/ Floor Under Cover
*C LH Side *D RH Side


K157647C01
0.333,5.083 6.833,8.75 6.5,3.667 0.333,6.917 6.833,6.917 false 0.417,5.177 0.729,5.333 0.313,0.156 10 false *C 0.417,7 0.729,7.156 0.313,0.156 10 false *D 0.104,0.083 0.417,0.281 0.313,0.198 10 false *A 0.104,0.333 0.417,0.531 0.313,0.198 10 false *B
*A for RHD *B w/o Floor Under Cover
*C LH Side *D RH Side