In cases in which only one dimension is given, left and right are symmetrical.
For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).
| Symbol | Name | Hole Diameter
mm (in.) |
|---|---|---|
| A | Back Door Hinge Installation Hole | φ11(0.43) |
| a | Back Door Hinge Installation Hole | 16X10
(0.63X0.39) |
| B, b | Back Door Damper Stay Installation Nut | M6 (0.24) |
| C | Back Door Opening Upper Frame Center Mark | - |
| D, d | Roof Side Inner Reinforcement Corner | - |
| E, e | Back Door Opening Lower Reinforcement Corner | - |
| F, f | Quarter Panel Standard Hole | φ13 (0.51) |
| G, g | Back Door Opening Trough Standard Hole | φ10 (0.39) |
| H, h | Back Door Opening Lower Reinforcement Corner | - |
| J, j | Back Door Lock Striker Installation Nut | M8 (0.31) |
| K, k | Wheelhouse Inner Gusset Standard Hole | φ10 (0.39) |
| L, l | Roof Side Rail Assembly Mark | - |
| *a | mm
(in.) |
- | - |
| *W | Width distance | *X | Diagonal distance |
| *a | mm
(in.) |
- | - |
| *L | Length distance | *X | Diagonal distance |
In cases in which only one dimension is given, left and right are symmetrical.
For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).
| Symbol | Name | Hole Diameter
mm (in.) |
|---|---|---|
| A | Console Installation Nut | M6 (0.24) |
| B, b | Center Floor Crossmember Standard Hole | φ13 (0.51) |
| C, c | Quarter Wheelhouse Inner Panel Standard Hole | φ10 (0.39) |
| D, d | Wheelhouse Inner Gusset Standard Hole | φ10 (0.39) |
| E, e | Quarter Panel Reinforcement Extension Standard Hole | φ10 (0.39) |
| F, f | Back Door Opening Lower Reinforcement Standard Hole | φ10 (0.39) |
| G, g | Back Door Opening Lower Reinforcement Standard Hole | φ10 (0.39) |
| H, h | Finish Plate Installation Hole | φ8.5 (0.33) |
| J, j | Back Door Lock Striker Installation Nut | M8 (0.31) |
| K, k | Rear Combination Light Installation Hole | 9X9
(0.35X0.35) |
| L, l | Rear Combination Light Installation Hole | 9X9
(0.35X0.35) |
| M, m | Rear Bumper Installation Nut | M6 (0.24) |
| N, n | Rear Combination Light Installation Hole | 12X8
(0.47X0.31) |
| O, o | Rear Bumper Retainer Installation Hole | 9X9
(0.35X0.35) |
| P, p | Crash Box Installation Nut | M8 (0.31) |
| *a | mm
(in.) |
- | - |
| *a | mm
(in.) |
- | - |
| *L | Length distance | *X | Diagonal distance |