Point B,b, C,c, H,h, J,j on the vehicle are asymmetrical.
In cases in which only one dimension is given, left and right are symmetrical.
For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).
| Symbol | Name | Hole Diameter
mm (in.) |
|---|---|---|
| A, a | Front Apron to Cowl Side Upper Member Standard Hole | φ10 (0.39) |
| B, b | Front Side Member Bracket Installation Bolt | M10 (0.39) |
| C, c | Front Side Member Bracket Installation Bolt | M10 (0.39) |
| D, d | Radiator Support Upper Standard Hole | φ10 (0.39) |
| E, e | Headlight Installation Hole | 9X9
(0.35X0.35) |
| F, f | Headlight Bracket No.1 Installation Bolt | M6 (0.24) |
| G, g | Headlight Bracket No.1 Installation Bolt | M6 (0.24) |
| H, h | Radiator Upper Support Installation Bolt | M6 (0.24) |
| J, j | Radiator Upper Support Installation Bolt | M6 (0.24) |
| K, k | Front End Panel Mounting Bracket Installation Bolt | M6 (0.24) |
|
Symmetric distance |
|
Asymmetric distance |
| *a | Radiator Upper Support Installation | *b | mm
(in.) |
| *L | Length distance | - | - |