Home › Vehicle Exterior › BODY PANEL › FRONT FENDER FRONT APRON (for 3 Door) › from 2020.09
BM36W0E _01 Vehicle Exterior _088117 BODY PANEL _0449239 FRONT FENDER FRONT APRON(for 3 Door) F

BODY PANEL  FRONT FENDER FRONT APRON(for 3 Door)  ASSEMBLY REPLACEMENT  


K159788

REMOVAL


Symbol Meaning
K108818

Remove Weld Points

a.

Roughly cut open the panel so that the adhesive can be reached. Cut through the adhesive with a cut chisel to remove the panel.

HINT:

In cases where the adhesive cannot be removed with a cut chisel, heat the adhesive with an industrial heater gun or gas burner taking care not to cause panel deformation by overheating.


K158764C02
0.156,0.156 0.469,0.354 0.313,0.198 10 false *A
*A LH - -
K108837

Adhesive - -


K158765C02
0.156,0.156 0.469,0.354 0.313,0.198 10 false *A
*A LH - -



b.

Roughly cut open the panel so that the adhesive can be reached. Cut through the adhesive with a cut chisel to remove the panel.

HINT:

In cases where the adhesive cannot be removed with a cut chisel, heat the adhesive with an industrial heater gun or gas burner taking care not to cause panel deformation by overheating.


K158766C02
0.156,0.156 0.469,0.354 0.313,0.198 10 false *A
*A RH - -
K108837

Adhesive - -


K158767C02
0.156,0.156 0.469,0.354 0.313,0.198 10 false *A
*A RH - -




INSTALLATION


Symbol Meaning
K108823

Plug Weld

a.

Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.


b.

Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)


c.

Apply adhesive (3MTM AutomixTM Panel Bonding Adhesive #8115).

HINT:
·

Do not apply adhesive around the plug welding points.

·

Minimize squeeze out in plug welding areas.



K158764C02
0.156,0.156 0.469,0.354 0.313,0.198 10 false *A
*A LH - -
K108837

Adhesive - -


K158768C02
0.25,3.25 0.417,3.25 0.417,3.25 1.25,2.167 false 4.833,3.333 5,3.333 5,3.333 6.25,2.115 false 5.583,3.333 5.75,3.333 5.75,3.333 6.698,2.094 false 0.156,0.156 0.469,0.313 0.313,0.156 10 false *A 0.083,3.167 0.396,3.323 0.313,0.156 10 false *1 4.604,3.26 4.917,3.417 0.313,0.156 10 false *2 5.385,3.25 5.667,3.417 0.281,0.167 10 false *3
*A LH - -
*1 FRONT FENDER APRON *2 FRONT FENDER EXTENSION
*3 FRONT FENDER APRON EXTENSION FRONT - -



d.

Apply adhesive (3MTM AutomixTM Panel Bonding Adhesive #8115).

HINT:
·

Do not apply adhesive around the plug welding points.

·

Minimize squeeze out in plug welding areas.



K158766C02
0.156,0.156 0.469,0.354 0.313,0.198 10 false *A
*A RH - -
K108837

Adhesive - -


K158769C02
3.167,3.25 3,3.25 3,3.25 2.333,2.635 false 3.75,2.833 3.917,2.833 3.917,2.833 4.417,2.25 false 3.833,3.25 4,3.25 4,3.25 4.75,2.25 false 0.156,0.156 0.469,0.313 0.313,0.156 10 false *A 3.271,3.167 3.583,3.323 0.313,0.156 10 false *1 3.646,3.167 3.958,3.323 0.313,0.156 10 false *2 3.563,2.75 3.844,2.917 0.281,0.167 10 false *3
*A RH - -
*1 FRONT FENDER APRON *2 FRONT FENDER EXTENSION
*3 FRONT FENDER APRON EXTENSION FRONT - -



e.

After welding, apply body sealer and undercoating to the corresponding parts. (See the painting/coating)


f.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.