Home › Vehicle Exterior › BODY PANEL › QUARTER WHEEL HOUSING OUTER PANEL (for 3 Door) › from 2020.09
BM36W0E _01 Vehicle Exterior _088117 BODY PANEL _0449250 QUARTER WHEEL HOUSING OUTER PANEL(for 3 Door) F

BODY PANEL  QUARTER WHEEL HOUSING OUTER PANEL(for 3 Door)  CUT AND JOIN REPLACEMENT SECTIONS  


K159802

With the back door opening trough cut and join replacement removed.


REMOVAL


Symbol Meaning
K108818

Remove Weld Points
K108819

Remove Weld Points
K108820

Remove Weld Points
K108827

Cut and Join Location

a.

Roughly cut open the panel so that the adhesive can be reached. Cut through the adhesive with a cut chisel to remove the panel.

HINT:

In cases where the adhesive cannot be removed with a cut chisel, heat the adhesive with an industrial heater gun or gas burner taking care not to cause panel deformation by overheating.


K159490C01
0.167,0.167 0.479,0.365 0.313,0.198 10 false *A
*A LH - -
K108837

Adhesive - -



b.

Remove the A.

HINT:

A is reused.


K158985C01
1.417,3.333 1.25,3.333 1.25,3.333 1.406,2.646 false 0.167,0.167 0.479,0.323 0.313,0.156 10 false *A 1.5,3.271 1.771,3.51 0.271,0.24 10 false A
*A LH - -



c.

Remove the quarter wheel house reinforcement inner.

K158986C01
3.188,2.01 2.417,1.25 2.417,1.25 2.25,1.25 false 2.063,1.188 2.375,1.344 0.313,0.156 10 false *1 0.167,0.167 0.479,0.365 0.313,0.198 10 false *A
*A LH - -
*1 QUARTER WHEEL HOUSE REINFORCEMENT INNER - -



d.

Roughly cut open the panel so that the adhesive can be reached. Cut through the adhesive with a cut chisel to remove the panel.

HINT:

In cases where the adhesive cannot be removed with a cut chisel, heat the adhesive with an industrial heater gun or gas burner taking care not to cause panel deformation by overheating.


K158995C01
0.167,0.167 0.479,0.365 0.313,0.198 10 false *A
*A LH - -
K108837

Adhesive - -



e.

Remove the quarter wheel house panel outer.

K158987C01
4.667,4.167 4.5,4.167 4.5,4.167 3.833,2.719 false 4.74,4.104 5.052,4.26 0.313,0.156 10 false *1 2.802,1.76 3.01,1.948 0.208,0.188 10 true *a 3.927,1.469 4.24,1.625 0.313,0.156 10 false *b 0.167,0.167 0.479,0.365 0.313,0.198 10 false *A
*A LH - -
*1 QUARTER WHEEL HOUSE PANEL OUTER - -
*a 115 mm (4.53 in.) *b 160 mm (6.30 in.)


K158988C01
0.167,0.167 0.479,0.323 0.313,0.156 10 false *A
*A LH - -



f.

Roughly cut open the panel so that the adhesive can be reached. Cut through the adhesive with a cut chisel to remove the panel.

HINT:

In cases where the adhesive cannot be removed with a cut chisel, heat the adhesive with an industrial heater gun or gas burner taking care not to cause panel deformation by overheating.


K159491C01
0.188,0.177 0.5,0.333 0.313,0.156 10 false *A
*A RH - -
K108837

Adhesive - -



g.

Remove the A.

HINT:

A is reused.


K158989C01
2.333,3.417 2.5,3.417 2.5,3.417 2.365,2.625 false 0.167,0.167 0.479,0.323 0.313,0.156 10 false *A 2.198,3.354 2.469,3.594 0.271,0.24 10 false A
*A RH - -



h.

Remove the quarter wheel house reinforcement inner.

K158990C01
3.958,2.01 4.75,1.25 4.75,1.25 4.917,1.25 false 5,1.188 5.313,1.344 0.313,0.156 10 false *1 0.167,0.167 0.479,0.365 0.313,0.198 10 false *A
*A RH - -
*1 QUARTER WHEEL HOUSE REINFORCEMENT INNER - -



i.

Roughly cut open the panel so that the adhesive can be reached. Cut through the adhesive with a cut chisel to remove the panel.

HINT:

In cases where the adhesive cannot be removed with a cut chisel, heat the adhesive with an industrial heater gun or gas burner taking care not to cause panel deformation by overheating.


K158996C01
0.167,0.177 0.479,0.333 0.313,0.156 10 false *A
*A RH - -
K108837

Adhesive - -



j.

Remove the quarter wheel house panel outer.

K158991C01
2.417,4.167 2.583,4.167 2.583,4.167 3.24,2.698 false 2.229,4.104 2.542,4.26 0.313,0.156 10 false *1 4.198,1.792 4.406,1.979 0.208,0.188 10 true *a 3.115,1.469 3.427,1.625 0.313,0.156 10 false *b 0.167,0.167 0.479,0.365 0.313,0.198 10 false *A
*A RH - -
*1 QUARTER WHEEL HOUSE PANEL OUTER - -
*a 115 mm (4.53 in.) *b 160 mm (6.30 in.)


K158992C01
0.167,0.167 0.479,0.323 0.313,0.156 10 false *A
*A RH - -




INSTALLATION


Symbol Meaning
K108821

Spot Weld
K108823

Plug Weld
K108824

Plug Weld
K108825

Plug Weld
K108831

Butt Weld
K108835

Assembly Mark

a.

For positioning of the new parts, align the installation standard holes of the outer panel and the inner panel.

K158993C01
0.167,0.177 0.479,0.333 0.313,0.156 10 false *A
*A LH - -



b.

Apply adhesive (3MTM AutomixTM Panel Bonding Adhesive #8115).

HINT:
·

Do not apply adhesive around the plug welding points.

·

Minimize squeeze out in plug welding areas.



K158995C01
0.167,0.167 0.479,0.365 0.313,0.198 10 false *A
*A LH - -
K108837

Adhesive - -



c.

Weld the quarter wheel house panel outer to the vehicle side.

K158997C01
4.75,4.167 4.583,4.167 4.583,4.167 3.708,2.792 false 0.188,0.177 0.5,0.333 0.313,0.156 10 false *A 4.823,4.104 5.135,4.26 0.313,0.156 10 false *1
*A LH - -
*1 QUARTER WHEEL HOUSE PANEL OUTER - -


K158998C01
0.167,0.167 0.479,0.323 0.313,0.156 10 false *A
*A LH - -



d.

Weld the quarter wheel house reinforcement inner to the vehicle side.

K158999C01
3.188,2.01 2.417,1.25 2.417,1.25 2.25,1.25 false 2.063,1.188 2.375,1.344 0.313,0.156 10 false *1 0.167,0.167 0.479,0.365 0.313,0.198 10 false *A
*A LH - -
*1 QUARTER WHEEL HOUSE REINFORCEMENT INNER - -



e.

Apply adhesive (3MTM AutomixTM Panel Bonding Adhesive #8115).

HINT:
·

Do not apply adhesive around the plug welding points.

·

Minimize squeeze out in plug welding areas.



K159490C01
0.167,0.167 0.479,0.365 0.313,0.198 10 false *A
*A LH - -
K108837

Adhesive - -



f.

Weld the A to the vehicle side.

K159000C01
1.417,3.333 1.25,3.333 1.25,3.333 1.417,2.646 false 0.167,0.167 0.479,0.323 0.313,0.156 10 false *A 1.479,3.26 1.75,3.5 0.271,0.24 10 false A
*A LH - -



g.

For positioning of the new parts, align the installation standard holes of the outer panel and the inner panel.

K158994C01
0.167,0.177 0.479,0.333 0.313,0.156 10 false *A
*A RH - -
K108837

Adhesive - -



h.

Apply adhesive (3MTM AutomixTM Panel Bonding Adhesive #8115).

HINT:
·

Do not apply adhesive around the plug welding points.

·

Minimize squeeze out in plug welding areas.



K158996C01
0.167,0.177 0.479,0.333 0.313,0.156 10 false *A
*A RH - -
K108837

Adhesive - -



i.

Weld the quarter wheel house panel outer to the vehicle side.

K159001C01
2.417,4.167 2.583,4.167 2.583,4.167 3.24,2.698 false 2.229,4.104 2.542,4.26 0.313,0.156 10 false *1 0.167,0.167 0.479,0.365 0.313,0.198 10 false *A
*A RH - -
*1 QUARTER WHEEL HOUSE PANEL OUTER - -


K159002C01
0.167,0.167 0.479,0.323 0.313,0.156 10 false *A
*A RH - -



j.

Weld the quarter wheel house reinforcement inner to the vehicle side.

K159003C01
3.958,2.01 4.75,1.25 4.75,1.25 4.917,1.25 false 5,1.188 5.313,1.344 0.313,0.156 10 false *1 0.167,0.167 0.479,0.365 0.313,0.198 10 false *A
*A RH - -
*1 QUARTER WHEEL HOUSE REINFORCEMENT INNER - -



k.

Apply adhesive (3MTM AutomixTM Panel Bonding Adhesive #8115).

HINT:
·

Do not apply adhesive around the plug welding points.

·

Minimize squeeze out in plug welding areas.



K159491C01
0.188,0.177 0.5,0.333 0.313,0.156 10 false *A
*A RH - -
K108837

Adhesive - -



l.

Weld the A to the vehicle side.

K159004C01
2.333,3.417 2.5,3.417 2.5,3.417 2.365,2.625 false 0.167,0.167 0.479,0.323 0.313,0.156 10 false *A 2.198,3.365 2.469,3.604 0.271,0.24 10 false A
*A RH - -



m.

After welding, apply body sealer and undercoating to the corresponding parts. (See the painting/coating)


n.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.