With the rear floor pan assembly removed.
REMOVAL
| Symbol Meaning | |
|---|---|
|
Remove Weld Points |
|
Remove Weld Points |
|
Cut and Join Location |
| *a | 380 mm (14.96 in.) | - | - |
INSTALLATION
| Symbol Meaning | |
|---|---|
|
Plug Weld |
|
Plug Weld |
|
Butt Weld |
Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)
| *1 | REAR FLOOR SIDE MEMBER FRONT | - | - |
| *A | LH | - | - |
| *1 | REAR FLOOR SIDE MEMBER FRONT | *2 | TRANSPORT HOOK SUB-ASSEMBLY REAR |
| *A | RH | - | - |
| *1 | REAR FLOOR SIDE MEMBER FRONT | *2 | REAR BUMPER ARM RETAINER |
After welding, apply undercoating to the corresponding parts. (See the painting /coating)
After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.