FUNCTION OF MAIN COMPONENTS
The main components in the RSA have the following functions.
| Components | Function | |
|---|---|---|
|
*1: Gasoline models *2: HV models *3: The threshold can be adjusted to 1 of 3 levels through the customization function. *4: Models with headup display |
||
| Forward Recognition Camera | ·
Captures road signs. ·
Performs RSA system control based on information of road signs captured by the camera sensor. ·
Controls the supply of electric current to the forward recognition hood with heater sub-assembly when the ambient temperature is low. |
|
| Forward Recognition Hood with Heater Sub-assembly | Control is performed by the forward recognition camera to supply electric current and heat the heater, preventing the windshield glass in front of the forward recognition camera from fogging up. | |
| ECM*1 | Sends the shift position signal to the forward recognition camera. | |
| Hybrid Vehicle Control ECU*2 | ||
| Brake Actuator Assembly*1 | Skid Control ECU | Sends a vehicle speed signal from the speed sensor to the forward recognition camera. |
| Brake Booster with Master Cylinder Assembly*2 | ||
| Combination Meter Assembly | Multi-information Display | ·
Displays road signs recognized by the forward recognition camera. ·
The RSA system can be turned on and off through the settings tab. |
| Buzzer | Sounds when the speed limit is exceeded.*3 | |
| Headup Display (Meter Mirror Sub-assembly)*4 | Displays road signs recognized by the forward recognition camera. | |
| Steering Pad Switch Assembly | Meter Control Switch | Sends a multi-information operating signal to the forward recognition camera. |
| Airbag Sensor Assembly | Yawrate Sensor | Detects the yaw rate and sends it to the forward recognition camera. |
| Steering Sensor | Detects the angle and direction of steering and transmits signals to the forward recognition camera. | |
| Turn Signal Switch | Sends a turn signal command to the steering sensor. | |
| Main Body ECU (Multiplex Network Body ECU) | ·
Sends the wiper operation signal to the forward recognition camera. ·
Sends country specification information signals to the forward recognition camera. |
|
| Air Conditioning Amplifier Assembly | Sends the outside temperature signal to the forward recognition camera. | |
| Central Gateway ECU (Network Gateway ECU) | Relays and transmits each CAN communication data signal. | |
FUNCTION
The RSA system recognizes the following traffic signs using the forward recognition camera.
| Category | Sign Type | Example of Recognizable Sign |
|---|---|---|
| Speed Limit | Round maximum speed limit |
|
| Supplemental Sign | School Zone |
|
The RSA system displays the following traffic signs using the forward recognition camera.
| Category | Display Example | Details | |
|---|---|---|---|
| Speed Limit Related |
|
·
Informs the driver of the maximum speed limit of the currently driven road. ·
The displayed sign reflects the speed limit on the recognized sign. |
|
| Conditional Speed Limit Sign | School Zone |
|
Informs the driver that the currently driven road is in a school zone and its speed limit changes depending on the time of day. |
A non-official (sign not meeting Vienna Convention) or a recently introduced traffic sign may not be recognized.
Notification functions are used in the RSA system which invert the colors of displayed signs, flash signs, etc. to notify the driver.
Speed Limit Exceeded Notification
While a speed limit sign is displayed, if the actual vehicle speed exceeds the speed limit plus a designated threshold*1, the colors of the displayed sign are inverted and the buzzer sounds.*2 For example, if the threshold is set to 5 km/h (3 mph) and the speed limit sign is 60 km/h (37 mph), the colors of the displayed sign are inverted and the buzzer sounds, when the actual vehicle speed exceeds 65 km/h (40 mph). Furthermore, the system also inverts a speed limit sign with supplemental sign in the same way. However, the system does not invert the colors of the supplemental sign.
*1: The threshold can be adjusted to 1 of 3 levels through the customization function.
*2: Customization is required for inverted display and sounding of the buzzer.
| Notification Method | Display Example |
|---|---|
| Inverted Display |
|
The RSA system can be turned on or off through the settings tab of the multi-information display.
A customization function is used for the RSA, which allows settings such as the notification method and level for exceeding the speed limit to be changed. Setting changes are made through the customization tab of the multi-information display. Refer to the Repair Manual for details.
SYSTEM CONTROL
RSA Control Pattern 1
After a road sign is recognized by the forward recognition camera, the sign is displayed on the multi-information display.
While a sign is displayed on the multi-information display, if no sign has been recognized within a specified distance, display of the current sign is turned off.
RSA Control Pattern 2
When the ignition switch is turned off while a speed limit sign is displayed on the multi-information display, the same sign is displayed when the ignition switch is turned ON (IG) again.
RSA Control Pattern 3
While a sign is displayed on the multi-information display, the sign is turned off when turning left or right onto a new road.
DIAGNOSIS
In order to make system inspections easier to perform, a diagnosis function is used in consideration of serviceability. The DTCs of malfunctioning parts can be read by connecting the GTS. For details, refer to the Repair Manual.