Home › Vehicle Interior › PRE-COLLISION › PRE-COLLISION SYSTEM
NM36W0E _58 Vehicle Interior _087358 PRE-COLLISION _0418098 PRE-COLLISION SYSTEM DE DETAILS F

PRE-COLLISION  PRE-COLLISION SYSTEM  DETAILS  CAMERA HEATER  


CONSTRUCTION


a.

The forward recognition hood with heater sub-assembly is positioned in the forward recognition bracket. The forward recognition hood with heater sub-assembly prevents condensation on the windshield in front of the forward recognition camera.

Y252755C01
2.708,0.167 2.875,0.167 2.875,0.167 3.375,1.083 true 4.719,1 4.552,1 4.552,1 3.552,1.729 true 2.521,0.052 2.833,0.208 0.313,0.156 10 false *a 4.792,0.896 5.104,1.052 0.313,0.156 10 false *b
*a Sheet Heater (Heating Element) *b Temperature Fuse (Built-in parts)




OPERATION


a.

When all of the following conditions have been met, the forward recognition hood with heater sub-assembly operates.

i.

Turn the ignition switch to ON.


ii.

The outside air temperature is approximately 10°C (50°F) or less.


iii.

A few minutes have elapsed since the forward recognition hood with heater sub-assembly operation stopped.



b.

After the forward recognition hood with heater sub-assembly operates, the operation will stop when a certain length of time has elapsed.

HINT:

Operating time will differ depending on vehicle conditions (vehicle speed, outside air temperature, etc.).